Filter
Top Products
32
4.3.4 Default FGID
Selects the default FGID to be used by the printer IPDS emulation when the host does
not send an FGID at the start of a job. This option is only available on IPDS emulation
code level 8141 or higher.
The option has three submenus containing the FGIDs used in each emulation. In the
table below the emulations are cross-referenced to pages in appendix B. Font and Code
Page Information. The FGIDs in the referenced tables are available in the operator
panel.
Option name Values
3812/3816 FGID See page 138, 143 and 146
4028/31xx FGID See page 138, 143 and 144
43xx FGID See page 138, 143 and 144
The 4028/31xx and 43xx printers all use 300 pel fonts. Selecting a Default FGID
value under the 4028/31xx menu or the 43xx menu will automatically change the
Default FGID value of the other 300 pel emulations. The 3812/16 FGID is not
affected by the other menu selections.
11* Default FGID for 3812/3816.
416* Default FGID for 4028/31xx and 43xx. When using a CPI value
of 10.0 FGID 416 is equal to FGID 11.
4.3.5 Default CPI
Selects the default characters per inch (CPI) to be used by the printer IPDS emulation
when the host does not send a CPI value at the start of a job. The option does not apply
to the fixed pitch fonts. This option is only available on IPDS emulation code level
8141 or higher.
The range is 5.0 to 30.0.
10.0* Default CPI