Filter
Top Products
49
4.6 MAP INPUT TRAYS Menu Options
This option defines the mapping of the host's request for a physical feeder or input tray
in the printer. Any host input source can be mapped to any printer input source. The
printer input source is mapped to an IPDS host number. Input sources include the
envelope feeder, manual feed paper or manual feed envelopes.
The labels Tray Mapping 1 - Tray Mapping 10 refer to the number of the mapping, not
the physical tray.
Note: The optional printer input sources will only be displayed when installed on
the printer.
A typical relationship between IPDS numbers and the input sources would be:
IPDS Number Printer Input Source
0 Tray 1
1 Tray 2
2 Tray 3
3 Tray 4
4 Tray 5
64 (40H) Envelopes (Manual or Feeder)
99 (63H) Manual Paper
Example 1
You may want to use one of the higher capacity input trays for IPDS 000. To swap the
IPDS number for Tray 1 and Tray 2, you will need to do the following:
1. Set TRAY MAP 2 for Tray 2 to "IPDS 000".
2. Set TRAY MAP 1 for Tray 1 to "IPDS 001".
This will give you:
TRAY MAP 1 = IPDS 001 mapped to Tray 1
TRAY MAP 2 = IPDS 000 mapped to Tray 2