Filter
Top Products
97
3. Select TCP/IP as Attachment Type and select Settings. The TCP/IP Settings menu
appears.
Enter the IP address of the printer. The IP address should be obtained from your
network administrator. The TCP/IP port number entered must be either 9100,
9102, or 9600.
9100 or 9600 for MarkNet S
9100 for Parallel 1 on MarkNet Pro or MarkNet XLe
9102 for Parallel 2 on MarkNet Pro or MarkNet XLe
Refer to 4.3.14 IPDS Timeout on page 40 for further information on the selection
of ports.
Select |OK| and then |Create|. The PSF/2 printer device is now created and is
ready to print from a PSF/2 connected IBM host.