Filter
Top Products
91
2. Define the printer to a JES printer.
a. Example for JES2
FSS(FSS1) PROC=PSFPROC,HASPFSSM=HASPFSSM
PRT7 FSS=FSS1,MODE=FSS,
PRMODE=(LINE,PAGE,SOSI1),
CLASS=C,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,
DRAIN,MARK,TRKCELL=YES
b. Example for JES3
FFSDEF,TYPE=WTR,FSSNAME=FSS3,PNAME=SAMPLE01,
SYSTEM=SYS1,TERM=NO,
DEVICE,DTYPE=PRTAFP1,NAME=PRT7,
JUNIT=(,SYS1,,OFF),FSSNAME=FSS3,
MODE=FSS,PM=(LINE,PAGE,SOSI1),CHARS=(YES,GT12),
CARRIAGE=(YES,A868),CKPNTGP=100,HEADER=YES,
WC=(C)
3. Add the printer to the PSF STARTUP PROC.
//PRT7 CNTL
//PRT7 PRINTDEV FONTDD=*.FONT01, /* FONT */
//OVLYDD=*.OLAY01, /* OVERLAY */
//PSEGDD=*.PSEG02, /* SEGMENT */
//PDEFDD=*.PDEF01, /* PAGEDEF */
//FDEFDD=*.FDEF01, /* FORMDEF */
//JOBHDR=*.JOBHDR, /* JOB HEADER */
//JOBTRLR=*.JOBTLR, /* JOB TRAILER */
//DSHDR=*.DSHDR, /* DATA SET HEADER */
//FORMDEF=A10110, /* FORMDEF */
//PIMSG=(YES,16), /* MESSAGES */
//DATACK=BLOCK, /* BLOCK DATA CHECKS */
//TRACE=NO, /* INTERNAL TRACE */
//MGMTMODE=OUTAVAIL, /* OUTPUT AVAILABLE */
//DISCINTV=15, /* TIMEOUT=15 SECONDS */
//TIMEOUT=REDRIVE,
//FAILURE=WCONNECT, /* ATTEMPT RECONNECT */
//IPADDR=157.184.67.102,
//PORTNO=9100,
//PRT7 ENDCNTL
Refer to the next section for information on selecting DISCINTV and PORTNO.