Filter
Top Products
79
3. Using CRTPSFCFG, specify the printer’s TCP/IP configuration information. This
PSF configuration object, which must be saved in library QGPL, overrides the
APPC device description just created with the CRTDEVPRT command. See the
example on page 81.
At the command line, type: CRTPSFCFG and press <F4>. Enter the following
information:
PSF Configuration DEVD OPTRA
(Same user defined name as before)
Library QGPL
IPDS pass through IPDSPASTHR *YES
Release timer RLSTMR *SEC15
Press <F10>, then <PAGE DOWN> to access the additional parameters.
Remote location RMTLOCNAME 157.184.67.102
(IP address or remote host name)
TCP/IP Port PORT 9100
(9100 or 9600 for MarkNet S)
(9100 for Parallel 1 on MarkNet Pro or MarkNet XLe)
(9102 for Parallel 2 on MarkNet Pro or MarkNet XLe)
Refer to 4.3.14 IPDS Timeout on page 40 for further information on the
selection of ports.
Press <ENTER> to create the PSF object.