Filter
Top Products
POD Farm 1.01 – Using Your Line 6 Hardware
2•9
Main Output Level Controls
Main Outputs 1-2 are controlled by a main volume knob and main mute button. The volume knob
is an analog level control and does not affect any level being sent to your computer. When Mute is
engaged, as solid amber LED illuminates, blinking about once every 2 seconds.
Note that these controls operate on main outputs 1-2 only (headphone and S/PDIF levels are not
affected). Outputs 3 – 8 are software controlled, via the Line 6 Audio-MIDI Devices application.
Headphone Output Controls
Headphone outputs 1-2 and 3-4 provide duplicate stereo outputs or Main Outs 1-2 and 3-4 respectively,
providing discrete control over output levels sent over the headphone jacks. Note that headphone
output levels are controlled independently of the Main volume control.
Power Button
When the power button is engaged, UX8’s main LEDs will illuminate. UX8 is not USB powered and
receives no power from the computer.
LED status indicators
The Main Mute and Main Clip LEDs provide secondary functions in their ability to indicate the
connection status of USB and S/PDIF, as follows:
No USB connection - The main clip LEDs alternate steadily between left and right, about once •
every second. The USB cable may be unplugged or the UX8 Line 6 audio driver may not be
installed on your computer.
The Line 6 audio driver is installed with the POD Farm applications installer - or you can launch Line 6
Monkey
and go to the Updates tab to check for and install the latest driver version.
No S/PDIF clock sync - The Mute LED blinks 3 times rapidly about once every second when the •
clock mode set to S/PDIF, and no external clock is present.