Linksys BEFSX41 Network Router User Manual


 
EtherFast
®
Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint
21
Instant Broadband
®
Series
3. Select Internet Protocol (TCP/IP), as shown in Figure 5-7, and click the
Properties button.
4. Select Obtain an IP address automatically. Once the new window Select
Obtain an IP address automatically in both places, as shown in Figure 5-
8, and click the OK button. Click the OK button again to complete the PC
configuration.
5. Restart your computer.
Go to “Chapter 6: Configure the Router.”
20
Chapter 6: Configure the Router
This chapter will show you how to configure the Router to function in your net-
work and gain access to the Internet through your Internet Service Provider
(ISP). Detailed description of the Router’s Web-based Utility can be found in
“Chapter 7: The Cable/DSL Firewall Router’s Web-based Utility.” Your ISP
may require the use of a Host Name and Domain Name. Further, you will set
the WAN Connection Type on the Router’s Setup tab based on the information
provided by your ISP. You will need the setup information from your ISP. If you
do not have this information, please contact your ISP before proceeding.
The instructions from your ISP will tell you how to set up your PC for Internet
access. Because you are now using the Router to share Internet access among
several computers, you will use the setup information to configure the Router
instead of your PC. You only need to configure the Router once using the first
computer you set up.
1. Open your web browser. (It
is all right if you get an error
message at this point.
Continue following these
directions.) Enter http://192.168.1.1 in the web browser’s Address field, as
shown in Figure 6-1. Press the Enter key.
2. An Enter Network Password window, shown in Figure 6-2, will appear
(Windows XP users will see a Connect to 192.168.1.1 window, shown in
Figure 6-3). Windows XP, the screen may look different.) Leave the User
Name field empty, and enter admin in lowercase letters in the Password
field (admin is the default password). Then, click the OK button.
Figure 6-1
Figure 6-2
Figure 6-3
Figure 5-7
Figure 5-8