EtherFast
®
Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint
6. Find and double-click TCP/IP in the list to the right (see Figure F-2).
7. After a few seconds, the main Network window will appear. The TCP/IP
Protocol should now be listed.
8. Click the OK button. Windows may ask for original Windows installation
files. Supply them as needed, e.g., c:\windows\options\cabs, D:\win98,
D:\win95, D:\win9x.
9. Windows will ask you to restart the PC. Click the Yes button.
The TCP/IP installation is now complete.
121
Instant Broadband
®
Series
Appendix F: Installing the TCP/IP
Protocol
Follow these instructions to install the TCP/IP protocol on one of your PCs only
after a network card has been successfully installed inside the PC. These
instructions are for Windows 95, Windows 98, and Windows Me. For TCP/IP
setup under Windows NT, 2000, and XP, see your Windows documentation or
the Help feature.
1. Click the Start button. Choose Settings and then Control Panel.
2. Double-click on the Network icon to bring up your Network window.
Select the Configuration tab.
3. Click the Add button.
4. Double-click on Protocol.
5. Highlight Microsoft under the list of manufacturers.
120
Figure F-2
Figure F-3
Figure F-1