Filter
Top Products
Configuring the Switch 11
Overview 11
Web-Based Configuration and Management 11
Logging On to the Switch 11
Basic Management Activities 12
General Management Configuration 13
Changing the System Name 13
Changing the Contact 14
Changing the Location 14
Changing the Administration Password 15
Changing the Guest Password 16
Statistic Collection 17
Reboot-on-Error 18
Remote Telnet Login 18
Remote Http Login 19
Returning to the Basic Management Screen 19
LAN Port Configuration 20
Changing the Speed and Flow Control 20
Setting the Line Speed 21
Changing the Flow Control 22
Admin Control 22
Displaying Physical Port Address 22
Returning to the Basic Management Screen 23
Console Port Configuration 23
Changing the Console Baud Rate 24
Selecting a Flow Control Method 24
Enabling or Disabling Modem Control Options 25
Specifying a Modem Setup String 25
Enabling or Disabling SLIP 26
Specifying a SLIP Address 26
Specifying a SLIP Subnet Mask 27
Returning to the Basic Management Screen 27
ProConnect II
®
Series
Table of Contents
Introduction 1
Getting to Know the Switch 2
LEDs 2
The RJ-45 Ports 3
The Gigabit Expansion Ports 3
The Console Port 3
The Back Panel 4
Installing the Switch 5
Pre-Installation Considerations 5
Desk Top or Shelf Mounting the Switch 6
Rack-Mounting the Switch 6
Powering on and Resetting the Switch 7
Power On Self Test 7
Uplinking the Switch 8
Installing the Gigabit Expansion Modules 8
Switch Management 9
Overview 9
Local Console Management 9
Remote Console Management 10
SNMP Management 10
Assigning an IP Address to the Switch 10
Logging On to the Switch 10
Layer 2 Management 4-Port Gigabit Ethernet Switch