Filter
Top Products
Spanning Tree Path Costs
Highlight Spanning Tree Path Costs in the Spanning Tree Protocol screen and
press the Enter key. A Spanning Tree Path Costs screen similar to the follow-
ing will appear.
Use the following procedure to change the costs in the Spanning Tree Path
Costs screen:
1. Use the Up Arrow and Down Arrow keys to highlight a specific port or
highlight All Ports.
2. Press the Enter key. The Enter Path Cost screen will appear.
3. Enter a new path cost, then press Enter. The new Spanning Tree path cost
appears next to the selected port.
4. Repeat steps 1 through 3 to change the Spanning Tree path costs for other
ports.
5. When you finish, press the Esc key until you return to the desired screen.
67
ProConnect II
®
Series
66
Layer 2 Management 4-Port Gigabit Ethernet Switch
Use the following procedure to change the administration status:
1. Use the Up Arrow and Down Arrow keys to highlight the desired port.
2. Press the Enter key. The Admin Status Options screen will appear.
• To manually enable the selected port, highlight Up and press Esc.
• To manually disable the selected port, highlight Down and press Esc
(to re-enable the port, repeat steps 1 through 3 and select Up in step 3).
3. Enable or disable the selected port (your selection will appear next to the
selected port).
4. To change the administration status options for other ports, repeat steps 1
through 3.
5. When you finish, press Esc.