Filter
Top Products
Data Addendum Host-Based Controller Modem
June 15, 1998 AT Command Set
AT Command Reference (continued)
Version 1.0 Lucent Technologies Inc.
17
&V View Active Configuration and Stored Profile
This command is used to display the active profiles.
For example:
Option Selection
AT Cmd
Comm Standard Bell B
CommandCharEcho Enabled E
Speaker Volume Medium L
Speaker Control OnUntilCarrier M
Result Codes Enabled Q
Dialer Type Tone T/P
ResultCode Form Text V
ExtendResultCode Enabled X
Dial Tone Detect Enabled X
Busy Tone Detect Enabled X
LSD Action Standard RS232 &C
DTR Action Standard RS232 &D
Press any key to continue; ESC to quit.
Option Selection
AT Cmd
V22b Guard Tone Disabled &G
Flow Control Hardware &K
Error Control Mode V42, MNP, Buffer \N
Data Compression Enabled %C
AutoAnswerRing# 0 S0
AT Escape Char 43 S2
CarriageReturnChar 13 S3
Linefeed Char 10 S4
Backspace Char 8 S5
Blind Dial Pause 2 sec S6
NoAnswer Timeout 50 sec S7
“ , “ Pause Time 2 sec S8
Press any key to continue; ESC to quit.
Option Selection
AT Cmd
No Carrier Disc 2000 msec S10
DTMF Dial Speed 95 msec S11
Escape GuardTime 1000 msec S12
Data Calling Tone Disabled S35
Line Rate 33600 S37
DSVD mode Disabled -SSE
Stored Phone Numbers
&Z0=
&Z1=
&Z2=
&Z3=
OK