Filter
Top Products
Host-Based Controller Modem Data Addendum
AT Command Set June 15, 1998
V.25ter AT Commands (continued)
Lucent Technologies Inc. Version 1.0
58
<v8o>, <v8a>, and <v8cf>
+A8I:<v8cf><CR> This indication is used by an
answering DCE, if +A8E,<v8a> !=0,
to indicate detection of a V.8 CI
signal, and report the recovered
Call Function octet(s). Value
<v8cf> is a hexadecimal code octet
that can take values as shown
above in +A8E command.
+A8M=<hexadecimal
coded CM or JM octet
string>
Coded CM
or JM octet
Refer to V.8 document for coding. Directs the DCE to send a V.8 CM
or JM signal using the specified
hexadecimal coded string.
+A8A:<type><CR> <type>
1 Indicates V.8 ANSam signal
flags
0 Indicated no ANSam signal detected
This indication is used by a calling
DCE, if +A8E <v8o> #0, to indicate
detection of an answering signal.