Filter
Top Products
Host-Based Controller Modem Data Addendum
AT Command Set June 15, 1998
AT Commands for Homologation Testing and Debugging (continued)
Lucent Technologies Inc. Version 1.0
84
Country Specific S Register Defaults
Note: The values listed in Table 15 are typical values and change based on OEM preferences.
Table 156. Country Specific Defaults for S Registers
S Reg. Australia Belgium Denmark Finland France Germany
s0 000 000 000 000 000 000
s6 004 004 004 004 002 004
s7 050 050 050 050 140 050
s8 002 004 002 004 002 004
s10 020 020 020 002 002 020
s11 095 090* 090* 090* 090* 090*
s30 000 000 000 000 000 000
s35 001 001 001* 001* 001 001
* Changing this value with the ATS command is not permitted.
Table 16. Country Specific Defaults for S Registers (continued)
S Reg. Netherlands Italy New Zeal. Norway Spain Sweden
s0 000 000 000 000 000 000
s6 005 004 004 004 004 004
s7 050 050 050 050 050 050
s8 002 002 004 004 005 004
s10 020 020 015 009 020 020
s11 090* 090* 090 090* 090* 090*
s30 000 000 000 000 000 000
s35 001* 001 001 001* 001* 001*
* Changing this value with the ATS command is not permitted.
Table 16. Country Specific Defaults for S Registers (continued)
S Reg. Switzerland UK Austria Japan China Korea
s0 000 000 000 000 000 000
s6 004 004 004 004 002 004
s7 050 050 050 050 050 045
s8 004 004 004 002 002 002
s10 020 020 020 020 020 020
s11 090* 090 090* 095 095 095
s30 000 000 000 000 000 000
s35 001 001 001* 000 001 001
* Changing this value with the ATS command is not permitted.