Filter
Top Products
Data Addendum Host-Based Controller Modem
June 15, 1998 AT Command Set
AT Command Summary (continued)
Version 1.0 Lucent Technologies Inc.
5
Result Code Numeric Description
CONNECT 29333 EC* 101 Connection at 29333 bit/s (V.90 mode)
CONNECT 30666 EC* 102 Connection at 30666 bit/s (V.90 mode)
CONNECT 33333 EC* 103 Connection at 33333 bit/s (V.90 mode)
CONNECT 34666 EC* 104 Connection at 34666 bit/s (V.90 mode)
CONNECT 37333 EC* 105 Connection at 37333 bit/s (V.90 mode)
CONNECT 38666 EC* 106 Connection at 38666 bit/s (V.90 mode)
CONNECT 41333 EC* 107 Connection at 41333 bit/s (V.90 mode)
CONNECT 42666 EC* 108 Connection at 42666 bit/s (V.90 mode)
CONNECT 45333 EC* 109 Connection at 45333 bit/s (V.90 mode)
CONNECT 46666 EC* 110 Connection at 46666 bit/s (V.90 mode)
CONNECT 49333 EC* 111 Connection at 49333 bit/s (V.90 mode)
CONNECT 50666 EC* 112 Connection at 50666 bit/s (V.90 mode)
CONNECT 53333 EC* 113 Connection at 53333 bit/s (V.90 mode)
CONNECT 54666 EC* 114 Connection at 54666 bits/s (V.90 mode)
* EC only appears when the extended result codes configuration option is enabled. EC is replaced by one of the following symbols,
depending upon the error control method used:
V42bis—V.42 error control and V.42bis data compression.
V42—V.42 error control only.
MNP 5—MNP class 4 error control and MNP class 5 data compression.
MNP 4—MNP class 4 error control only.
NoEC—No error control protocol.