Filter
Top Products
&KDSWHU,QWURGXFWLRQ
The 1 Slot CardBus PCI Expansion System
MAGMA's 1 Slot CardBus PCI Expansion System is a general-purpose
bus expansion system for the Peripheral Component Interconnect (PCI)
local bus. The expansion bus is fully compliant with the PCI Local Bus
Specification. The PCI Expansion System consists of a CardBus Card,
an expansion bus cable (a shielded, high-speed cable), and a chassis
with a power supply.
Enclosure: Portable
Dimensions: 5.45"W x 1.70"H x 8.02"D (CB1H)
5.45"W x 1.70"H x 13.43"D (CB1F)
Weight: 2.5 lbs.
Construction: Aluminum/Steel
Cooling: Optimal Cooling with a 4 CFM fan
Motherboard: 1 PCI Slot (supports full or short-length PCI cards)
AC-DC Power Brick 45 Watt
External 115-230VAC AC Power Supply (included)
Providing 12 volt DC input power
Power to PCI Slot:
4.0A @ +3.3V 3.0A @ +5V
0.6A @ +12V 0.6A @ -12V
PCI Bus: 32 bits/33 MHz
Environment:
0
°
to 50
°
C Operating Temperature
-20
°
to 60
°
C Storage Temperature
5% to 85% Relative Humidity, Non-condensing
Certifications: FCC Class A Approved
CE Compliance
Warranty: 1 Year Return to Factory
Options: 1 ½ meter cable
6-foot battery cable with male XLR 4-pin connector
Pre-Installation Information
Before using the MAGMA PCI Expansion System you should perform
the following steps:
•
Inventory the shipping carton contents for all of the required parts
•
Gather all of the necessary tools required for installation
•
Read this manual
Follow these suggested guidelines and cautions while setting up your
PCI Expansion System:
•
Only use the interface cable provided by MAGMA
•
Use keyed connectors (to prevent attaching a cable backwards)
•
Be careful when routing signal cables to your devices
•
Avoid sharp bends or folds in the signal cable