You should also see a separate entry for each PCI card installed in the
PCI Expansion System. For example, if you have an Adaptec 2906
SCSI card installed in the chassis, you should see a console window
similar to the one shown below:
MAGMA expansion chassis Adaptec 2906 SCSI Controller
NOTE
Some PCI cards will produce multiple entries in the MagmaSlots
console window.
If MagmaSlots does not display some or all of the PCI cards installed in
the expansion chassis, you should do the following before contacting
MAGMA Technical Support:
1. Make sure that you apply power to the expansion chassis first,
then power up the computer.
2. Make sure the MAGMA CardBus Interface is inserted with the
Gold Strip facing up.
3. Make sure all cables are securely connected.