Filter
Top Products
NOTE
It is HIGHLY recommended that Microsoft Windows users meticulously
follow the MAGMA Software Driver Installation instructions detailed in
Appendix B of this manual. If you do not follow the driver installation
instructions, you have greatly increased your chances of failure when
configuring your system.
Step Eight: System Should Be Up and Running
WARNING
High voltages are present inside the chassis when the unit’s powe
r
cord is plugged into an electrical outlet. Disconnect the power cord
from its source.
CAUTION
Before touching anything inside the chassis, move to an ESD station
and follow proper ESD procedure. Failure to do so may result in
electrostatic discharge damaging the computer or its components. Fo
r
more information, see “Protecting Against Electrostatic Discharge”.
If there is a problem, be sure to turn off the power before making any
changes. If you are having trouble with the system, turn off the host
computer and the chassis, then check that all cards are seated properly
and all cables are connected.
If you are still having problems, contact MAGMA Technical Support for
more help.
Step Nine: Finishing Touches
WARNING
High voltages are present inside the chassis when the unit’s powe
r
cord is plugged into an electrical outlet. Disconnect the power cord
from its source before replacing the chassis cover.
CAUTION
Before touching anything inside the chassis, move to an ESD station
and follow proper ESD procedure. Failure to do so may result in
electrostatic discharge damaging the computer or its components. Fo
r
more information, see “Protecting Against Electrostatic Discharge”.