Filter
Top Products
Safety Instructions
Before handling the MAGMA PCI Expansion System, read the following
instructions and safety guidelines to prevent damage to the product and
to ensure your own personal safety. Refer to the “Advisories” section
for advisory conventions used in this manual, including the distinction
between Warnings, Cautions, and Notes.
♦
Always use caution when handling/operating the computer.
Only qualified, experienced, authorized electronics personnel
should access the interior of the computer. The power supplies
produce high voltages and energy hazards, which can cause
bodily harm.
♦
Use extreme caution when installing or removing components.
Refer to the installation instructions in this manual for
precautions and procedures. If you have any questions,
please contact MAGMA Technical Support.
WARNING
High voltages are present inside the chassis when the unit’s powe
r
cord is plugged into and electrical outlet. Disconnect the power cord
from its source before removing the chassis cover.
Never modify or remove the radio frequency interference shielding from
your workstation or expansion unit. To do so may cause your installation
to produce emissions that could interfere with other electronic
equipment in the area of your system.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals
2. Disconnect the computer and peripherals from their power
sources to prevent electric shock or system board damage.
3. Follow the guidelines provided in “Regulatory Compliance
Statements” on the following page.
4. Disconnect any telephone or telecommunications lines from
the computer.