Filter
Top Products
You should now Turn off computer. This means, Shut down your
computer completely.
After you have Turned off computer completely, it’s time to power-up
again. The following System Settings Change Window will appear.
Click
. Your computer will reboot.
As your system comes up, if PCI cards are installed in the expansion
chassis, you may be prompted to load or locate drivers. Follow the
instructions you see on the screen and install the drivers just as you
would on a desktop computer. (You should refer to the procedures for
installing drivers that was included with the third-party PCI device(s) you
are installing) If prompted to reboot, do so.
Verify Installation
Go to Start Control Panel Printers and Other Hardware
System Hardware Device Manager (make sure ‘View device by
connection’ is chosen) ACPI Microsoft ACPI-Compliant System
PCI Bus Click the ‘+’ sign several times until your reach the DEC
Bridge 21150 PCI to PCI Bridge. Under this entry you should see any
hardware that is installed in the expansion chassis. (In the following
example, there is an ATTO PCI SCSI Controller [LSI Logic 8950U…]
installed in the expansion system.)