McDATA 8832 Switch User Manual


 
IBM BladeCenter Deployment Guide
Version 3.0, 3/10/2006 http://w3-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100564
35
atch out for this RETAIN tip: http://www-If you are installing SLES9 to a local drive on an HS20, w
1.ibm.com/support/docview.wss?uid=psg1MIGR-57841.
4.7 RDAC Installation and Configuration
Notes on Linux
There are two versions of the Linux RDAC. The version (09.00.A5.09)for Linux 2.4 kernels only li
hat EL
ke
Red 3 and SuSe SLES 8 and RDAC package version 09.01.B5.XX for Linux 2.6 kernel
ager for
RDAC as the failover/failback driver, the host type should be set to LNXCL
ge
tition.
d when using Linux in a cluster, or when
type. It
I layer does not support skipped (sparse) LUNs. If the mapped LUNs are not
ped
S4000
d
e invoked by using either hot_add
or mppBusRescan command (note that hot_add is a symbolic link to mppBusRescan). There are
AC driver doesn't support LUN deletion. One
rives
he Management Module command-line interface provides access to the text-console command prompt
u can establish
environment.
Make sure you read the README.TXT files for V9.15 Linux RDAC, HBA and Storage Man
Linux.
When using the Linux
instead of Linux. If Linux RDAC is not used, the host type of Linux must be used instead.
There is not a requirement that the UTM (Access LUN) must be removed from the LNXCL Stora
Partitioning par
The Linux RDAC driver cannot co-exist with a HBA-level multi-path failover/failback driver such as the
6.06.63-fo driver. You might have to modify the driver make file for it to be compiled in the non-
failover mode.
Auto Logical Drive Transfer (ADT/AVT) mode is not supporte
using RDAC. Since ADT(AVT) is automatically enabled in the Linux storage partitioning host
has to be disabled by selecting 'host type' of LNXCL.
AVT is required if you are using the Qlogic Failover drivers.
The Linux SCS
contiguous, the Linux kernel will not scan the rest of the LUNs. Therefore, the LUNs after the skip
LUN will not be available to the host server. The LUNs should always be mapped using consecutive
LUN numbers
Although the host server can have different FC HBAs from multiple vendors or different FC HBA
models from the same vendors, only one model of FC HBAs can be connected to the IBM D
Storage Servers.
If a host server has multiple HBA ports and each HBA port sees both controllers (via an un-zone
switch), the Linux RDAC driver may return I/O errors during controller failover.
Linux SCSI device names have the possibility of changing when the host system reboots. We
recommend using a utility such as devlabel to create user-defined device names that will map
devices based on a unique identifier, called a UUID. The devlabel utility is available as part of the
Red Hat Enterprise Linux 3 distribution, or online at: http://www.lerhaupt.com/devlabel/devlabel.html
Linux RDAC supports re-scanning to recognize a newly mapped LUN without rebooting the server.
The utility program is packed with the Linux RDAC driver. It can b
man pages for both commands. However, the Linux RD
has to reboot the server after deleting the mapped logical d
4.8 Serial Over LAN (SOL) for Blades
4.8.1 Overview
T
on each blade server through a Serial over LAN (SOL) connection, enabling the blade servers to be
managed from a remote location.
To start an SOL connection with a blade server, you must first start a telnet or ssh session with the
management module. When this session is running, you can start a remote-console SOL session with
any blade server in the BladeCenter unit that is set up and enabled for SOL operation. Yo
up to 20 separate Telnet sessions with a BladeCenter management module. For a BladeCenter unit, this
enables you to have 14 simultaneous SOL sessions active (one for each of up to 14 blade servers) with 6
additional command-line interface sessions available for BladeCenter unit management.
The BladeCenter Deployment Guide is intended as a personal productivity tool. It is not intended to be comprehensive and is provided for
guidance only, on an 'as is basis' without warranty of any kind. Please be aware that its contents have not been certified by IBM.