Filter
Top Products
4.2 Comet installation and user manual: E-6761200XT/FA
Merlin Gerin by MGE UPS SYSTEMS
If the transfer conditions (AC input power within tolerances) are correct, the
inverter comes on line and supplies the load,
■■ the green "load protected" light 21 remains on,
In the event of a fault, the red "load not protected" light goes on. See the "alarms
section".
start-up (cont')
21
I
+–
!
!
O
2218
inverter start-up (system in manual start-up mode)
■ press the green "inverter on" button 22 :
■■ the green "load protected" light 21 flashes,
■■ the inverter 7 starts and if the transfer conditions are correct, the load is
transferred to the inverter,
■■ the red "load not protected" light 18 goes off,
■■ the green "load protected" light 21 goes on.
21
I
+–
!
!
O
2218