Comet installation and user manual: E-6761200XT/FB
11.1Merlin Gerin by MGE UPS SYSTEMS
appendices
general characteristics
■ the Comet range is made up of three types of uninterruptible power supplies:
■■ Comet series 11 (single-phase input, single-phase output),
■■ Comet series 31 (three-phase + neutral input, single-phase output),
■■ Comet series 33 (three-phase + neutral input, three-phase + neutral output);
■ each UPS may be configured in a number of manners via a special interface
14 .
On the following pages, standard configuration parameters are indicated in bold
type.
A modification in the configuration requires on-site servicing by the after-sales
support department;
■ except where indicated, the data provided are typical values corresponding to:
■■ a rated single-phase voltage of 230V and a rated three-phase voltage of 400V,
■■ a linear rated load with a power factor of 0.8.
range characteristics
■ standards
■■ design: CEI 146
■■ product: EN 50091
■■ safety: CEI 950
■■ protection: CEI 529 (IP 215)
■■ electromagnetic compatibility: CEI 801
EN 55011
EN 55022
EN 50091-2
■ environment conditions
■■ ambient temperature
(1)
: < 25°C recommended
0 to 30°C permanent
35°C up to 24 hours
40°C up to 8 hours
■■ relative humidity (%): 0 to 95
■■ maximum altitude without derating: < 1000m
■ configuration
■■ low battery shutdown warning (minutes): 1, 2, 3, 4, 5, ...20
■■ inverter start-up: automatic or manual
■■ battery charger: internal or external
■■ transfer to bypass outside tolerances: yes / no
■■ frequency converter: yes / no
■ colour
■■ standard: RAL 9002
(1): for a 5 kVA Comet S11 or S31, see the "overload" section.