Filter
Top Products
• Battery life: 8+ hours operation
• AC: 9V DC - 1 amp AC adapter for continuous operation or charging
User Interface
• x 64 Graphic LCD with backlight
• cm x 3.8 cm (2.25” x 1.5”) display area
• Elastomeric keypad with tactile feedback, numeric input, dedicated functions, 4 soft functions
and cursor pad
• Context-sensitive help and operating instructions
• Tone generation audio for warning or other user feedback
• Date stamp of all tests
Environmental
• Operating Temperature: 0 to 50° C (32 to 122° F)
• Storage Temperature: -10 to 55° C (14 to 131° F)
• Operating Humidity (non-condensing): 10 to 90%
• Storage Humidity: 5 to 95%
Measurement Ports
•
PentaScanner+
: BNC and 36-pin connector that withstands in excess of 20,000 mating cycles
•
PentaScanner
/
PentaScanner
Cable Admin
: BNC and shielded Modular 8 (RJ-45)
connector
• Testing of all four pairs on RJ-45 is fully supported
Serial Port
• Connector, Cable: DB-9
• Baud rate: 300 to 38,400 baud
• Parity: NONE
• Length: 8 Bits
• Handshaking: None, RTS/CTS, and XON/XOFF
Memory
• Control: Flash memory allows electronic upgrading in remote locations
• Test Storage: Up to 500 complete Autotest results can be stored in permanent flash memory
(
PentaScanner+
). Up to 500 complete Autotests results can be stored in battery-backed
memory (
PentaScanner
,
PentaScanner
Cable Admin
)
Autotest Functions
• Full suite of tests to determine if cable meets generic cabling or network type requirements
(TIA/EIA TSB-67, ISO Class C, D, 10-BASE-T, Token Ring, Fast Ethernet, ATM 155 etc.)
• Up to 20 user definable Autotest programs
Wire Map
• Uses Injector for complete mapping of wiring at both ends of the cable
• Finds miswires, opens, shorts, split pairs
• Includes test of shield if connected