Filter
Top Products
preprogrammed search bands for active frequencies, then store any that you
find into your scanner's channels or monitor memories.
Notes:
You can use the scanner's delay feature while using band search.
During band search, you can manually change the receive mode.
Follow these steps to search for and store active frequencies using band
search.
1. Press BAND. The last selected band number (b followed by a number,
such as b02), SRCH, and the frequency search range appear on the
display.
2. To select a different band, enter the band's number (01-17), or
repeatedly press BAND until the desired band number appears on the
display.
3. Hold down Up Arrow for about 1 second to search up from the bottom of
the band, or Down Arrow for about 1 second to search from the top of
the band. Up or Down Arrow appears on the display.
Notes:
To reverse the search direction at any time, hold down Up or Down
Arrow for about 1 second.
To search the band upward or downward in small increments
(in steps of 5, 12.5, or 25 kHz, depending on the band), repeatedly
press and release Up or Down Arrow.
When the scanner finds an active frequency, it stops searching and
displays the frequency's number.
To store the displayed frequency in the lowest available channel,
press ENTER. Up or Down Arrow and the channel and frequency flash
twice, and the scanner stores the displayed frequency. Then the
scanner continues to search for frequencies.
Note:
If there is no empty channel, CH-FULL appears. To store more
frequencies, you must clear some channels. To continue searching after
CH-FULL appears, press CLEAR then press and hold Up or Down Arrow for
about 1 second.
To store the displayed frequency in the lowest available monitor
memory, press MON. The frequency flashes twice, and M and the monitor
memory number flash. To search for another active frequency in the
selected band, press and hold Up or Down Arrow for about 1 second.
To store the displayed frequency in the lowest available monitor
memory, press MON. The frequency flashes twice, and M and the monitor
memory number flash. To search for another active frequency in the