Filter
Top Products
If you want to store the frequency anyway, press ENTER again.
5. Repeat Steps 2-4 to store more frequencies into the priority channels
(up to 10 channels.)
To turn on the priority feature, press PRI when the scanner is in the scan
or manual mode. Pri -On- and PRI appear on the display. The scanner
checks the priority channels every 2 seconds. It stays on a priority
channel if there is activity, and P, a priority channel number, and CH
appear along with the priority frequency.
To turn off the priority feature, press PRI. PRI disappears from the
display.
Locking Out Priority Channels
1. Press PGM.
2. Repeatedly press PRI to select the priority channel you want to lock
out.
3. Press L/OUT.
Note:
If you have programmed only one priority channel, PCH ALL-OFF appears
on the display.
CHANGING THE AM/FM RECEIVE MODE
The scanner is preset to the most common AM or FM receive mode for each
frequency range. The preset modes are:
Frequency Band (MHz) Receive Mode
29.000-54.000 FM
108.000-136.975 AM
137.000-174.000 FM
380.000-512.000 FM
806.000-960.000 FM
The preset mode is correct in most cases. However, some amateur radio
broadcasts do not operate in the preset mode. If you try to listen to a
broadcast when the scanner is not set to the correct receive mode, the
broadcast might sound weak or distorted.
To change the mode, press AM/FM.AM or FM blinks on the display to indicate
that the displayed receive mode has been changed from the preset mode.
Note:
If you change any frequency band's receive mode during a search, the