Filter
Top Products
scanner no longer uses any of the preset receive modes. Instead, the
scanner uses the selected mode to search for frequencies in all bands.
To return to the default settings, hold down CLEAR, then press AM/FM.
USING THE DISPLAY BACKLIGHT
You can turn on the display's backlight for easy viewing dimly-lit areas.
Press LIGHT to turn on the display light for 5 seconds. To turn off the
light before it automatically turns off, press LIGHT again.
TURNING THE KEY TONE ON AND OFF
Each time you press any of the scanner's keys (except KEY SYMBOL and
LIGHT), the scanner sounds a tone.
Follow these steps to turn the scanner's key tone off or back on.
1. If the scanner is on, turn VOLUME OFF/MAX counterclockwise until it
clicks to turn it off.
2. While you hold down the 2 and ENTER keys, turn on the scanner.
3. After 1 second, release 2 and ENTER.
USING THE KEYLOCK
Once you program your scanner, you can protect it from accidental program
changes by turning on the keylock feature. When the keypad is locked, the
only controls that operate are SCAN, MANUAL, LIGHT, VOLUME OFF/MAX, and
SQUELCH MIN/MAX (and the scanner can still scan channels).
To turn on the keylock, hold down KEY for about 3 seconds until the
scanner beeps three times and KEY appears on the display. To turn it off,
hold down KEY for about 3 seconds until the scanner beeps three times and
KEY disappears from the display.
CONNECTING A DATA LINK TO THE SCANNER
A data interface kit (not supplied) lets you program the scanner with
frequencies stored in a computer program. Contact your local Radio Shack
store for more information.
(br/km-03/06/1997)
Handheld Scanner
(200-0564) Care and Maintenance Faxback Doc. # 38259
Your Radio Shack PRO-64 400-Channel Portable Scanner is an example of
superior design and craftsmanship. The following suggestions will help
you care for your scanner so you can enjoy it for years.
Keep the scanner dry. If it gets wet, wipe it dry immediately.
Liquids can contain minerals that can corrode the electronic circuits.