Filter
Top Products
2. Use the number keys to enter the channel number or monitor memory
number containing the frequency you want to delete.
3. If you are deleting the frequency from a channel, press PGM. If you
are deleting the frequency from a monitor memory, press MON.
4. Press 0, then press ENTER. The frequency is deleted.
5. To delete more frequencies, repeat Steps 2-4.
Deleting Frequencies from All Channels Within a Bank
You can delete the frequencies in all channels within a bank. This lets
you quickly delete all frequencies from a bank if, for example, you want
to use the bank to store a different set of frequencies.
1. Press AUTO. AUTO appears.
2. Repeatedly press AUTO to select the channel-storage bank that has the
frequencies you want to delete.
3. Hold down ENTER, then press CLEAR.
Deleting Frequencies from All Locked-Out Channels Within a Bank
You can delete the frequencies in all locked-out channels within a bank.
This lets you delete all the old or uninteresting frequencies in channels
you have locked out.
1. Press AUTO. AUTO appears.
2. Repeatedly press AUTO to select the channel-storage bank that has the
frequencies you want to delete.
3. Hold down ENTER, then press L/OUT.
SORTING FREQUENCIES WITHIN A BANK
You can sort the frequencies you have stored within a bank. The scanner
moves the frequencies into consecutive channels, either from the lowest
to the highest frequency, or the highest to the lowest frequency. This
makes it easy for you to see the range of frequencies you found
(during auto store for example).
Notes:
During frequency sort, the scanner moves the frequencies it finds
within the bank from higher channels to lower, empty channels.
If you turn the scanner off during frequency sort, the scanner stays
on until it saves the portion of the sort it completed. Then it turns
itself off.
1. Press AUTO. AUTO appears.
2. Repeatedly press AUTO to select the channel-storage bank that has the