Filter
Top Products
5. Press ENTER. The scanner stores the frequency in the selected
channel.
6. To move another monitor memory frequency to the next channel, press
PGM and repeat Steps 3-5.
Moving Frequencies from Monitor Memories to a Bank
Your scanner can move all the frequencies you have stored in monitor
memories into a bank you specify.
Notes:
If there are more frequencies in the monitor memories than there are
empty channels in the bank you select, the scanner moves only as many
frequencies from the monitor memories as it has room for in the bank.
The scanner moves monitor memory frequencies into channels even if the
same frequencies are already stored in other channels.
1. Press AUTO. The bar under the current bank number flashes, and AUTO
and AC-XXCH appear where XX is the number of available channels in
the current bank. If the current bank is full, A-FULL appears.
2. Repeatedly press AUTO to select the channel-storage bank where you
want to store monitor memory frequencies.
3. Hold down ENTER, then press MON. The scanner moves all frequencies
stored in monitor memories into the bank.
Moving Frequencies from Banks to Monitor Memories
You can move all stored frequencies within a bank to monitor memories.
This lets you quickly clear channels within a bank without losing the
frequencies.
Important:
If you move frequencies from a bank to monitor memories, all
frequencies already in the monitor memories are replaced with those
frequencies and any empty channels from the bank.
1. Press AUTO. AUTO appears.
2. Repeatedly press AUTO to select the channel-storage bank that has the
frequencies you want to move.
3. Hold down ENTER, then press DIRECT/. . The scanner automatically
moves all frequencies in channels within the bank to monitor memories.
DELETING FREQUENCIES
Deleting a Frequency from a Channel or Monitor Memory
1. Press PGM.