Filter
Top Products
3-2 Smartio C168H/HS User’s Manual
Installing Driver
Following is the procedure for installing the Smartio C168 Series driver for the
first time
under Windows NT 4.0.
Note ! Make sure the board(s) has(have) already been plugged in the system
slot(s) if you are doing
quick installation.
1. Please log in NT as Administrator.
2. Open the [Control Panel], click on the [Network] icon and select the
[
Adapters] tab.
3. Click on the [Add] button, then the [Have Disk...] button in “Select Network
Adapter”.
4. Specify the exact path of the driver diskette, A:\WINDOWS.NT. Then click
[
OK].