Filter
Top Products
Software Installation
Smartio C168H/HS User’s Manual 3-35
Setting MOXA Ports to Terminal
Following procedure is how to set the MOXA port to the “Terminal” for login
purpose, taking ttya11 as an example,
SCO UNIX/OpenServer
# enable /dev/ttye11
UNIX SVR4.2
1.
Edit (e.g. use vi editor) the file /etc/inittab.
2. Modify the tty entry from "ma11:23:off:/etc/getty ttye11 9600" to
"ma11:23:respawn:/etc/getty ttye11 9600".
3. # init q
Or refer to your UNIX system manuals for how to activate a tty port.