Filter
Top Products
3-30 Smartio C168H/HS User’s Manual
others it may stand for 7-data-bit, even-parity. So, please examine the “getty
default” file carefully, and make sure the terminal settings is the same. Otherwise,
garbled data will be inevitable.
Advanced Configuration
In the [Advanced configuration] dialog, users can set baud rate mapping, Rx FIFO
trigger level, Tx FIFO trigger level and RTS/CTS hardware flow control.
Baud Rate Mapping
There are two different baud rate tables can be selected: High Band and Low Band.
The highest baud rate for High Band is 921.6K bps, while 38.4K bps for Low Band.
Because of the limit of UNIX termio/termios definition, the highest baud rate label
is B38400 (mapped to 38.4K bps). If users wish to use the baudrate higher than
38.4K bps for MOXA boards, this baud rate will be re-mapped to the lower as
defined in the below baudrate-mapping table: