Filter
Top Products
3-28 Smartio C168H/HS User’s Manual
Baud Rate Settings
For Smartio C168 Series set to High Speed Spectrum, the real working speed,
is exactly
eight times of the speed displayed by “stty” command. A port, if set to
Normal Speed Spectrum with 38.4 Kbps, will work at 38.4 Kbps for sure; while
a port, if set to High Speed Spectrum with displayed speed 38.4 Kbps, will
actually work at 307.2 Kbps (38.4 Kbps
¡Ñ8).
Note also that the 50 baud rate,
B50, will no longer stand for 50 bps, instead, it
means 57600 bps, and 75 baud rate,
B75, for 115.2 Kbps. Furthermore, if the C168
Family H Series board is set to High Speed Spectrum, the real working speed is 8
times of the displayed speed. Hence, B50, 57.6 Kbps, is for 460.8 Kbps and B75,
115.2 Kbps, is for 921.6 Kbps.
Administration Utility – moxaadm
Users can use the administration utility, moxaadm, to change the Smartio C168
basic and advanced configuration, to monitor the ports' activity, to use terminal
emulation and to remove the installed MOXA driver from the system.