Filter
Top Products
Software Installation
Smartio C168H/HS User’s Manual 3-23
If something went wrong, for instance, the board does not match the configuration
or the board is missing, the screen will show a message like:
API-232 Version 3.5
Universal 2/4/8 serial ports Communication Driver
Setup driver …
None serial port found!!
It means the
Smartio C168 Series driver is not installed properly. Please refer to
chapter, “Troubleshooting”, for possible reasons and solutions.
Unloading Driver
To unload (release) the Smartio C168 Series driver from memory, type “SER-
DRV/Q”
at the DOS prompt
UNIX
There are various UNIX operating systems, such as SCO UNIX, UNIX SVR4.2,
XENIX and Solaris, etc. Different types of UNIX drivers are required for different
UNIX. Moxa supports device drivers currently for
SCO UNIX/OpenServer and
UNIX SVR4.2 .
In this section, driver installation procedure is described. Administration utility,
moxaadm, is explained, which is for configuration, monitor and terminal emulation.
Related issues such as device naming, baud rate settings and terminal enable are
stated.
If you are interested in UNIX serial programming, extended Ioctl() commands are
provided in Chapter “Serial Programming Tools” for advanced programming.
UNIX-specific troubleshooting is included in Chapter “Troubleshooting”.