Filter
Top Products
5-10 Smartio C168H/HS User’s Manual
RS-485 Cable Wiring for Opt8J
One RS-485 connection box designed for Smartio C168 Series is:
Opt8J: Connection box with 8 female RS-422/485 DB25 ports. Set the port
switch to
ON position (RS-485) for the desired port(s).
The Opt8J supports
only 2-wire half-duplex RS-485 communication. Data+/- pins
are served for both data transmitting and receiving, depending on the RTS signal.
RS-485 Pinouts for Opt8J:
Opt8J
3 Data+(B)
7 GND
16 Data-(A)
Multidrop RS-485 Half-duplex Point-to-Point RS-485 Half-duplex
Opt8J RS-485 Device 1 Opt8J RS-485 Device
Master Slave
3 Data+(B) Data+(B)
3 Data+(B) Data+(B) 16 Data-(A) Data-(A)
16 Data-(A) Data-(A) 7 GND GND
7 GND GND
RS-485 Device N
Slave
Data+(B)
Data-(A)
GND
See Section “RS-485 Programming” of Chapter “Serial Programming Tools” for
more Opt8J RS-485 programming details.
3 Data+ (B)
Data-(A) 16
7 GND