Filter
Top Products
Multi-Tech Systems, Inc. MVPGSM 24
Chapter 4 – Configuring Your MultiVOIP GSM
Introduction
There are two methods of configuring your MultiVOIP GSM; one is through a web interface, and the other is
through the Windows software interface. There are several necessary parameters that must be set for the
MultiVOIP GSM unit to operate properly, with some additional settings that are optional. You must know the IP
address that will be used, the IP mask, the Gateway IP, and the Domain Name Server information. The
MultiVOIP GSM must be configured locally at first, but changes to this initial configuration can be done locally or
remotely. Local configuration is done through a connection between the “Console” port of the MultiVOIP GSM
and the COM port of the computer; the MultiVOIP GSM configuration software is used for this.
This chapter will explain the setup portion of the software pertaining to the list below, while Chapter 5 will cover
the Phone Book setup and Chapter 6 will discuss the Statistics options and overall maintenance of the MultiVOIP
GSM.
Software Categories Covered in This Chapter
¾ Ethernet/IP
¾ Voice/Fax
¾ Wireless Interface
¾ Call Signaling
o SIP
¾ Regional
¾ SMTP
¾ RADIUS
¾ Logs/Traces
¾ NAT Traversal
¾ Supplementary services
¾ Save Setup
¾ Connection
o Settings