Filter
Top Products
Chapter 6: Using the Software
Multi-Tech Systems, Inc. MVPGSM 70
Logs Screen Details: Field Definitions
Field Name Values Description
Log # column 1 or higher All calls are assigned an event number in chronological order, with the
most recent call having the highest event number.
Start Date, Time
column
dd:mm:yyyy
hh:mm:ss
The starting time of the call. The date is presented as a day and a month
of one or two digits, and a four-digit year, followed by a time-of-day.
Duration column hh:mm:ss This describes how long the call lasted in hours, minutes, and seconds.
Type SIP Indicates the Call Signaling protocol used for the call (SIP).
Status column success or failure Displays the status of the call (whether the call was completed or not).
IP Direction Incoming,
outgoing
Shows call "incoming" or "outgoing" with respect to the gateway.
Mode column voice or FAX Shows if the event being described was a voice call or a FAX call.
From column gateway name Displays the name of the voice gateway that originates the call.
To column gateway name Displays the name of the voice gateway that completes the call.
Special Buttons
Previous -- Displays log entry before currently selected one.
Next -- Displays log entry after currently selected one.
First -- Displays first log entry
Last -- Displays last log entry.
Delete File -- Deletes selected log file.
Call Details
Voice coder Coder protocol The voice coder being used on this call.
Disconnect Reason "Normal" or
"Local"
Indicates whether the call was disconnected simply because the desired
conversation was done or some other irregular cause.
DTMF Capability inband,
out of band
Indicates whether the DTMF dialing digits are carried "Inband" or "Out of
Band." The corresponding field values differ for the 3 different VOIP
protocols. For SIP it can display either "Out of Band RFC2833" or "Out of
Band SIP INFO" to indicate the out-of-band condition or "Inband" to
indicate the in-band condition.
Outbound Digits
Received
0-9, #, * These are the digits received from the remote SIP end point that are used
to initiate a call out on the wireless network.
Outbound Digits Sent 0-9, #, * These are the digits received from the wireless network and sent to the
remote SIP end point to place a call.
Server Details n.n.n.n When the MultiVOIP GSM is operating in the non-direct mode (with
proxy in SIP mode), this field shows the IP address of the server that is
directing IP phone traffic.
Packets sent integer value Number of voice packets sent over the IP network during this call.
Packets received integer value Number of voice packets received over the IP network in the course of
this call.
Packets lost integer value Number of voice packets from this call that were lost after being received
from the IP network.
Bytes sent integer value
Number of bytes of voice sent over the IP network during this call.
Bytes received integer value Number of bytes of voice received over the IP network during this call.
FROM Details
Gateway Name alphanumeric Identifier for the VOIP gateway that originated this call.
IP Address n.n.n.n IP address for the VOIP gateway that originated this call.
Options FEC, SC Displays transmission options used by the gateway originating the call.
TO Details
Gateway Name alphanumeric Identifier for the VOIP gateway that received this call.
IP Address n.n.n.n IP address for the VOIP gateway that received this call.
Options Displays transmission options used by VOIP gateway receiving the call.
Supplementary Services Info
Call Transferred To phone number Number of party called in transfer.
Call Forwarded To phone number Number of party called in forwarding.