Filter
Top Products
Service Manual
Disassembly and Reassembly
3-2
3.2 White Roller Ass,y
1. Open the OPE Unit. 2. Push the Bushing on RH end of the roller slightly inward,
then rotate it until it reaches the slot as shown below.
Then lift the roller out.
Note: Check the roller for any dirt. Clean with a soft cloth
dampened with water.
If the roller is heavily worn replace it with a new one.
White Roller
2
1
Bush
3.3 Rear Cover
1. Remove the four screws securing the Rear Cover and
remove it, as shown below.
2. Unlatch the Face up Cover Securing the Rear Cover,
as shown below. Then lift the Face up Cover out.
Cover-Face up
Rear Cover