Filter
Top Products
Service Manual
Alignment & Troubleshooting
4-24
NO. Not Assigned
Meaning: The speed dial location you tried to use has no number assigned to it.
Solution: Dial the number manually with the keypad, or assign the number.
[No Paper]Add Paper
Meaning: The paper cassette is empty. The printer system stops.
Solution: Load new paper in the paper tray.
Operation NotAssigned
Meaning: You are doing in the Add/ Cancel operation, but there is no jobs waiting.
Solution: Check the display to see if there is any scheduled job. The display should
indicate them in Standby mode, for example, Delay Fax.
[Paper Jam 0]Open/Close Door
Meaning: Paper has jammed in paper feeding area. Paper is jammed in pick-up unit
Solution: Press STOP and clear the jam.
[Paper Jam 1]Open/Close Door
Meaning: Paper has jammed inside the unit. Paper has jammed in paper exit unit.
Solution: Clear the jam.
[Paper Jam 2]Check Inside
Meaning: Paper has jammed inside the unit. Paper has jammed in fuser area.
Solution: Clear the jam.
Power Failure
Meaning: Power has turned off then on and the machine’s memory has not been saved.
Solution: You need to start again the job which you were trying to do before the power failure.
Retry Redial?
Meaning: The machine is waiting for the programmed interval to automatically redial.
Solution: You can press START to immediately redial, or STOP to cancel the redial operation.
[Stop Pressed]
Meaning: The Stop/Clear button is pressed during a copy or fax operation.
Solution: Try again.
[Toner Empty]
Meaning: The toner cartridge has run out. The machine stops printing.
Solution: Replace with a new toner cartridge.
[Toner Low]
Meaning: The toner cartridge is almost empty.
Solution: Take out the toner cartridge and gently shake it. By doing this, you can temporarily
reestablish printing operations."