Filter
Top Products
Service Manual
Disassembly and Reassembly
3-15
1. Before you remove the LSU, you should remove:
- Scan Ass'y (see section 3.11)
2. Unplug the two connectors from the LSU, as shown
below.
3. Remove the four screws securing the LSU and
remove it.
3.18 LSU-Unit
LSU
1. Before you remove the Engine Shield Ass'y, you
should remove:
- Rear Cover (see section 3.3)
- Side Cover L (see section 3.4)
- Side Cover R (see section 3.5)
2. Remove the twelve screws securing the Engine Shield
Ass'y and remove it. Then unplug the all connectors
from the SMPS and Main PBA, Main High PBA.
3.19 Engine Shield Ass'y
Engine Shield
Ass'y