Filter
Top Products
Service Manual
Disassembly and Reassembly
3-9
1. Before you remove the Scan Ass'y, you should
remove:
- Rear Cover (see section 3.3)
- Side Cover L (see section 3.4)
- Side Cover R (see section 3.5)
- Front Cover (see section 3.10)
2. Unplug the three connectors (OPE, CIS, scan motor)
from the Main PBA. Then remove the two Ground
Cables, as shown below.
3. Remove the four screws securing the Top Cover and
remove the Scan Ass'y, as shown below.
3.11 Scan Ass'y
OPE
CIS
CIS
OPE
Scan Ass'y