Muratec M860 Fax Machine User Manual


 
Beyond the Basics
2.9
Broadcasting
Relay Broadcast Initiation
Broadcasting is a fax function allowing one fax machine to send one fax
document to numerous other machines with a minimum of trouble for the user.
While your machine doesn’t do broadcasting, it can perform relay broadcast
initiation. In this process, your fax machine transmits a document to a high-
volume “hub” Muratec fax machine and specifies a call group ---- a designated
group of fax numbers stored in that machine’s autodialer ---- to which the hub fax
machine should broadcast the document. The remote fax then receives your
document, stores the document in memory and retransmits the document to each
number in the designated group of fax numbers stored in that machine’s
autodialer. (So, of course, you’ll have to know the proper call group number in
order to do this.)
To initiate a relay broadcast:
1. Insert the document and press
program
,
3
.
Relay Broadcast
2. Press
mode/enter
.
Group No. :
3. Use the numeric keypad to enter the number of the call group to which you
want the hub fax machine to broadcast the document. (You can specify the
group from 00 to 32 for each relay broadcast initiation. “00” means all group
numbers.)
To enter more than one group, press
program
after entering a group number.
When the group number resets to the above display, enter the next group
number. Do not press
program
after you enter the last group number.
4. Press
mode/enter
.
_
5. Enter the fax number of the hub fax machine. (You may use a one-touch or
speed-dial number or simply enter a number on the numeric keypad.)
To begin relay broadcast initiation, skip to step 7. To perform delayed relay
broadcast initiation, go to step 6.
6. To perform delayed relay broadcast initiation, press
program
. Use the
numeric keypad to enter the date and time when your fax machine should to
the delayed relay broadcast initiation. If you want to change a just one number
in date or time, use the one-touch key
a
to move backward (leftward) in the
sequence. Use the one-touch key
b
to move forward (rightward).
Time : 27,17.50
7. Press
start
. If you set the relay broadcast initiation to begin right now, your
fax machine will start dialing the hub fax machine. If you set the command for
delayed operation, the fax will go into “Reserved” mode.