Filter
Top Products
Using the System Utilities
Using the EISA Configuration Utility
5-14 NCR S10 Desktop Server User Guide
If your system comes configured with 16 MB or
more of system memory, and your system is not
configured with an add-on card that requires the use
of memory in the 15-16 MB range, select 16 MB Ext
Memory with 15-16 MB System Used.
If your system comes configured with 16 MB or
more of system memory, and your system is
configured with an add-on card that requires the use
of memory in the 15-16 MB range, select 16 MB Ext
Memory with 15-16 MB Add-On Card Used.
5. After making the appropriate selection, press
[Enter]. You are returned to the system baseboard
configuration screen.
6. If your system is configured with more than 16 MB
of system memory, press [Control] + [R] to select 16
- 64 MB Extended Memory - - - - - - - CTRL-R to add
the Memory.
7. Observe the following memory configuration
screen:
Memory Address (-) 16 M Type: SYSTEM
Size 0
(value between 0 - 48M,
in increments of 4M)
8. Tab to the size (amount of memory in range) field.
If your system has 64 MB or more of system
memory, enter 48M.