Filter
Top Products
Using the BIOS Setup Utility
Leaving Setup
NCR S10 Desktop Server User Guide 4-27
Leaving Setup
Examine the system configuration values. When you
are satisfied that all the values are correct, write them
down. Store the recorded values in a safe place, such as
in this manual. In the future, if the battery loses power,
or the CMOS chip is damaged, you will know what
values to enter when you rerun Setup.
To leave the system configuration setup, follow these
steps:
1. Press [Esc] to leave setup.
2. If there is any change in the BIOS Utility functions,
you must choose to save or not save any changes.
Use the arrow keys to select your response.
Select Yes to store the new data in BIOS Setup. Select
No to retain the old configuration values.
3. Press [Enter].