Filter
Top Products
Sample Configurations
Sample Standard Configuration
C-2 NCR S10 Desktop Server User Guide
Sample Standard
Configuration
A standard configuration might consist of the following:
•
Pentium 166 MHz processor with parity memory
support
•
32 MB system memory
•
ISA video board with 1 MB video RAM
•
PCI Ethernet adapter (SMC8432BTA)
•
PCI Token Ring adapter (Olicom OC-3136)
•
2 GB SCSI disk drive connected to an integrated
Adaptec 7870 PCI SCSI controller
•
SCSI CD-ROM drive connected to an integrated
Adaptec 7870 PCI SCSI controller
Following are the steps to install and configure this
sample configuration.
To install the hardware, follow these steps:
1.
Strap the SCSI IDs for the 2 GB SCSI disk drive and
the SCSI CD-ROM drive. (See the documentation
that came with your drives for strapping
information.)
2.
Install the 2 GB SCSI disk drive over the power
supply.
Installing the
Hardware