Filter
Top Products
Using the BIOS Setup Utility
PCI System Configuration
NCR S10 Desktop Server User Guide 4-17
PCI System Configuration
Figure 4-5 shows the screen that appears when you
select the PCI System Configuration menu from the
BIOS Utility menu.
PCI System Configuration
VGA Palette Snoop
On Board SCSI AIC-7870
Boot Device
PCI IRQ Setting
PCISlot1
PCISlot2
PCISlot3
On Board SCSI
[Manual]
[Disabled]
[Enabled]
[Enabled]
INTA
[--]
[--]
[--]
[--]
INTB
[--]
[--]
[--]
[--]
INTC
[--]
[--]
[--]
[--]
INTD
[--]
[--]
[--]
[--]
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
= Change setting,
Page 1/1
Each PCI slot supports four interrupt pins. The INTA
pin is automatically reserved for Function Number 0
(master function). The remaining interrupt pins (INTB,
INTC, and INTD) are reserved for multifunction. Refer
to your card manual for the interrupt pin assignments.
This parameter assigns the IRQ level for each interrupt
pin of the PCI slots. You can assign any of the following
available IRQ levels: 3, 5, 9, 10, 11, 14, and 15.
Figure 4-5
PCI System Configuration Menu
(Page 1 of 1)
PCI Slot Number