Filter
Top Products
Sample Configurations
Sample Standard Configuration
C-6 NCR S10 Desktop Server User Guide
11.
Press [Esc] to return to the main menu in BIOS
Setup.
To configure the PCI adapters, follow these steps:
1. Select PCI System Configuration from the main
menu in BIOS Setup.
2.
Use the up and down arrow keys to select the PCI
slot number. Use the right and left arrow keys to
change the IRQ Level for INTA Pin settings.
• Available IRQ settings are 3, 4 ,5, 7, 9, 10, 11, 14,
and 15.
• To make IRQ 3 available for selection, you must
disable Serial Port 2 in the System Security
menu.
• To make IRQ 4 available for selection, you must
disable Serial Port 1 in the System Security
menu.
• To make IRQ 7 available for selection, you must
disable Parallel Port 1 in the System Security
menu.
3.
Make the following settings:
• Set PCI IRQ Setting to Manual.
• Set PCI slot 1 (PCI Ethernet Adapter
SMC8432BTA) to IRQ5.
• Set PCI slot 2 (PCI Token Ring Adapter Olicom
OC-3136) to IRQ 14.
Configuring the PCI
Adapters