Filter
Top Products
8-3
x List of Direct Button Combinations
CTL+ Input (1-10) Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote buttons
for direct input selection in the Entry Edit window.
CTL+ ENTER (While displaying Entry list) Displays the selected signal.
CTL+ CANCEL Returns to the previous menu without closing the slidebar or dialog.
CTL+ UNDO Clears all menus or adjustment/setting screens. All adjustments are saved
automatically.
CTL+ ̆̄̇̈ Moves the slidebar or dialog box horizontally or vertically.
While using zoom on remote control: Displays the magnifying glass icon.
CTL+ ̇ (BS) Deletes one letter or numeral in the entry screen.
CTL+MUTE OSD Turns off the on-screen display forcibly.
CTL+ MENU (ADDRESS) Displays the remote ID entry window.
CTL+ IMAGE (PROJECTOR) Sequentially selects the Projector Options sub menu.
CTL+ POSITION (LENS) Displays the Lens Shift adjustment window.
CTL+ KEYSTONE (R) Turns on red. Available only when the projector is in the test pattern mode.
CTL+ AMPLITUDE (G) Turns on green. Available only when the projector is in the test pattern
mode.
CTL+ ENTRY LIST (B) Turns on blue. Available only when the projector is in the test pattern mode.
Stores a signal in the Entry List when you are not displaying a test pattern.
CTL+ MAGNIFY (ZOOM) Zooms the lens in and out
CTL+ (FOCUS) Adjusts the lens focus.
CTL+ INFO. Stores lens position settings.
8. Using On-Screen Menu