Filter
Top Products
Safety Guide [IP8800/S3600] [IP8800/S2400]
xliv
■ Do not use the cable with the protection cap detached.
• Do not remove protection cap except when connecting the cable. Operating them with the protection cap
detached may cause an electric shock.
Since external power supply EPU-B has a high output power, the label below is attached near the external
power connector.
■ Handle the power cable with caution.
• Do not put a heavy material on the power cable or do not pull, bend, or modify the power cable. The power
cable will be damaged and fire disasters or electric shock may be caused. A heavy material may be
accidentally placed as a result of covering the cable with a floor carpet.
• Use the attached power cable or the power cable complying with the specifications. If any other cable is
used, fire disasters or electric shock may be caused. Do not use the attached power cable for other
purposes. If used, fire disasters or electric shock may be caused.
• If the power cable is degraded (e.g., wire cores exposed or broken), ask the service personnel for
replacement. Otherwise, fire disasters or electric shock may be caused.
• Check to see if no dust is deposited on the power plug. Insert the plug securely to the end so that shakiness
will not occur. If dust is deposited or connection is incomplete, fire disasters or electric shock may be
caused.
■ Do not use too many plugs at a single outlet.
• Do not use too many power plugs at a single outlet. Much loads on an electrical outlet may cause fire
disasters and the breaker gone off due to the exceeded in-use electric energy, affecting other components.
■ Before installing/uninstalling the power supply, unplug the power cable.
• Before installing/uninstalling the power supply, unplug the power cable from the power supply. With the
power cable connected, some circuit supplies power even though the power switch is turned OFF.
Therefore, installing/uninstalling the power supply with the power cable connected may cause a fire
disasters or electric shock.
■ Keep air dusters away from fire.
• If you use an air duster with combustible gas to clean the optical connector, keep away from fire. Otherwise,
fire disaster may occur.