Filter
Top Products
1. Overview
9
Neighboring system information
cannot be acquired by LLDP
function
- 3.16.1 Unable to Obtain Neighboring System
Information via LLDP Function
Neighboring system information
cannot be acquired by OADP
function
- 3.16.2 Unable to Obtain Neighboring System
Information via OADP Function
Communication failure in NTP - 3.17.1 Time Synchronization by NTP Is Disabled
Failure when using IEEE802.3ah/
UDLD function
Port becomes inactive 3.18.1 Port Becomes Inactive Due to IEEE802.3ah/
UDLD Function
Problems on redundant
configuration of basic control unit
(BCU)/control and switching unit
(CSU)/management and switching
unit (MSU)
[IP8800/S6700] [IP8800/
S6600] [IP8800/S6300]
- 3.19.1 Active System Switchover Is Disabled
Problems on redundant
configuration of basic switching
unit (BSU) [IP8800/S6700]
BSU switchover disabled 3.20.1 Active BSU Switchover Is Disabled
Problem on using power saving
function
Schedule is disabled
[IP8800/S6700] [IP8800/S6600]
3.21.1 Schedule Is Disabled [IP8800/S6700]
[IP8800/S6600]
Communication failure due to
discard of packets
- 3.23.1 Checking Filtering/QoS Setting Information
Communication failure due to
resource shortage
[IP8800/S6700] [IP8800/
S6600] [IP8800/S6300]
The volume of MAC address table used
exceeds the accommodating condition.
4.1 MAC Address Table Resource Shortage
The volume of VLAN identification table
used exceeds the accommodating
condition.
4.2 When Resource Shortage of VLAN Identification
Table Occurs
Resource shortage of shared memory
4.3 When Resource Shortage Occurs in Shared
Memory
Others - Re-check the setting according to "Configuration
Settings."
Item Subitem Reference