NEC IP8800/S6600 Network Hardware User Manual


 
Safety Guide [IP8800/S3600] [IP8800/S2400]
xlix
Do not install the device in any place possibly reaching a high temperature.
Be careful that the parts may be damaged if left in a place exposed to direct sunlight or close to a heating
apparatus.
Do not bring a TV or radio close to the device.
Leaving a TV or radio close to the device can adversely influence to each other. If the device interferes a
TV or radio, remedy as follows:
Keep the device from the television or radio set as far away as possible.
Change the direction of the antenna for the television or radio set.
Use different outlets.
Keep the device away from a place with hydrogen sulfide or much salt.
Places with hydrogen sulfide including hot spring resorts, and places with much salt including coasts may
shorten lifetime of the device.
Before installing/uninstalling the power cable, turn off the power switch.
Before installing/uninstalling the power cables for AC power supply model, PoE AC power supply model,
or external power unit (EPU), turn off the power switch on the device.
For the redundant power supply model, turn off the power switches on the power supplies before installing
or removing the power cable or cable connector.
For the external power cable, turn off the power switch on the power module in advance.
When replacing the power supply or fan unit with the device powered on, complete
the task within the specified duration of time.
When replacing the power supply or fan unit with the device powered on, complete the entire task from
removal to installation within three minutes. If it takes more than three minutes, a failure may occur due to
temperature rise inside the device.
CAUTION